Primary resonant optimal control for nested homoclinic and heteroclinic bifurcations in single-dof nonlinear oscillators

A unified control theorem is presented in this paper, whose aim is to suppress the transversal intersections of stable and unstable manifolds of homoclinic and heteroclinic orbits in the Poincarè map embedding in system dynamics. Based on the control theorem, a primary resonant optimal control technique (PROCT for short) is applied to a general single-dof nonlinear oscillator. The novelty of this technique is able to obtain the unified analytical expressions of the control gain and the control parameters for suppressing the homoclinic and heteroclinic bifurcations, where the control gain can guarantee that the control region where the homoclinic and heteroclinic bifurcations do not occur can be enlarged as much as possible at least cost. The technique is applied to a nonlinear oscillator with a pair of nested homoclinic and heteroclinic orbits. By the PROCT, the transversal intersections of homoclinic and heteroclinic orbits can be suppressed, respectively. The hopping phenomenon that there coexist two kinds of chaotic attractors of Duffing-type and pendulum-type can be suppressed. On the contrary, if the first amplitude coefficient is greater than the critical heteroclinic bifurcation value, then another degenerate hopping behavior of chaos will take place again. Therefore, the phenomenon of hopping is the dominant type of chaos in this oscillator, whose suppressing or inducing is admissible from the points of practical and theoretical view.     

An effective permeability model to predict field-dependent modulus of magnetorheological elastomers

Magnetorheological elastomers (MREs) are composites where magnetic particles are suspended in a non-magnetic solid or a gel-like matrix. MREs are shown to have a controllable, field-dependent shear modulus. Most of conventional MREs models are based on magnetic dipole interactions between two adjacent particles of the chain. These models can predict the field-dependent properties of MREs with simple chain-like structures. In this paper, an effective permeability model is proposed to predict the field-induced modulus of MREs. Based on the effective permeability rule and taking into account the particle’s saturation, the model is proposed to predict the mechanical performances of MREs with complex structure and components. The effectiveness of the model is justified by a designed novel MREs.     

胃肠道正常组织与相应肿瘤组织结构的FTIR光谱研究

本文用傅里叶变换红外显微光谱对一系列胃肠道（食道、胃、结肠）肿瘤组织和相应正常组织的冰冻切片进行了研究。结果显示，所有肿瘤组织的光谱基本一致。而正常组织的光谱按１４００－９５０ｃｍ＾－１区域的特点可分为三类。对光谱中蛋白质酰胺Ｉ带曲线拟合的结果表明，正常组织和肿瘤组织中蛋白质的二级结构有着很大的差别。     

Magnetically actuated bi-directional microactuators with permalloy and Fe/Pt hard magnet

Bi-directional polyimide (PI) electromagnetic microactuator with different geometries are designed, fabricated and tested. Fabrication of the electromagnetic microactuator consists of 10 μm thick Ni/Fe (80/20) permalloy deposition on the PI diaphragm by electroplating, high aspect ratio electroplating of copper planar coil with 10 μm in thickness, bulk micromachining, and excimer laser selective ablation. They were fabricated by a novel concept avoiding the etching selectivity and residual stress problems during wafer etching. A mathematical model is created by ANSYS software to analyze the microactuator. The external magnetic field intensity (H_ext) generated by the planar coil is simulated by ANSYS software. ANSYS software is used to predict the deflection angle of the microactuator. Besides, to provide bi-directional and large deflection angle of microactuator, hard magnet Fe/Pt is deposited at a low temperature of 300 °C by sputtering onto the PI diaphragm to produce a perpendicular magnetic anisotropic field. This magnetic field can enhance the interaction with H_ext to induce attractive and repulsive bi-directional force to provide large displacement. The results of magnetic microactuator with and without hard magnets are compared and discussed. The preliminary result reveals that the electromagnetic microactuator with hard magnet shows a greater deflection angle than that without one.     

ICP—AES分析中干扰及其校正方法的进展（Ⅰ）

本文对ＩＣＰ－ＡＥＳ分析中的光谱干扰，非光谱干扰及其校正方法的研究及应用的新进展进行了综述。     

Factors affecting the superconductivity in the process of depositing Nd1.85Ce0.15CuO4-δ by the pulsed electron deposition technique

On SrTiO₃ single crystal substrate, by using the pulsed electron deposition technique, the high-quality electron doped Nd_1.85Ce_0.15CuO_4−δ superconducting film was successfully fabricated. After careful study on the R-T curves of the obtained samples deposited with different substrate temperatures, thicknesses, annealing methods and pulse frequencies, the effects of them on the superconductivity of the films were found, and the reasons were also analyzed. Additionally, by using the same model of the pulsed laser deposition technique, the relation between the target-to-substrate distance and the deposition pressure was drawn out as a quantitative one. Supported by the Key Project of Zhejiang Provincial Natural Science Foundation (Grant No. Z605131), the ‘100 Talents Project’ of Chinese Academy of Sciences, the Creative Research Group of National Natural Science Foundation of China (Grant No. 60321001) and the National Natural Science Foundation of China (Grant No. 60571029)     

纤维金属板层分层尺寸的测量方法研究

导出了纤维金属胶接层板双面裂纹搭接剪切（ＤＣＬＳ）试样分层尺寸和柔度之间的线性关系式，提出了ＤＣＬＳ试样分层尺寸的柔度测量法，并与用光测法测得的分层尺寸进行了对比。结果表明，用柔度法测定ＤＣＬＳ试样的分层尺寸，不仅测量结果准确，而且简单易行，避免了光测法的诸多麻烦和精度低的缺点。     

Nonlinear Stiffness of a Magneto-Rheological Damper

The last decade has witnessed an important role of magneto-rheological dampers in the semi-active vibration control on the basis of empirical models. Those models established by fitting experimental data, however, do not offer any explicit expressions for the stiffness and the damping of magneto-rheological dampers. Hence, it is not easy for engineers to get any intuitive information about the effects of stiffness and damping of a magneto-rheological damper on the dynamic performance of a controlled system. To manifest the nonlinear properties of a magneto-rheological damper, this paper presents the hysteretic phenomena and the additional nonlinear stiffness of a typical magneto-rheological damper in terms of equivalent linear stiffness and equivalent linear damping. Then, it gives a brief discussion about the effect of nonlinear stiffness on the vibration control through the numerical simulations and an experiment for the semi-active suspension of a quarter car model with a magneto-rheological damper installed. Both numerical simulations and experimental results show that the additional nonlinear stiffness in the magneto-rheological damper is remarkable, and should be taken into consideration in the design of vibration control.     

N，N，N’，N’-四炔丙基-4，4＇-二氨基-二苯甲烷与4，4＇-联苯二苄叠氮固化动力学研究

分别利用FtIR和DSC技术对由N，N，N＇，N＇-四炔丙基4,4’-二氨基-二苯甲烷（TPDDM）与4，4’-联苯二苄叠氮（BAMBP）形成的一种新型三唑树脂的固化反应及其动力学进行了研究．TPDDM与BAMBP通过1，3-偶极环加成反应形成三唑五元环结构的聚合物，固化起始温度约为70℃，体系在较低温度下即可固化．反应体系的固化反应是一级反应，采用DSC法与FFIR法分别获得了表观聚合反应动力学参数，其结果具有一定的可比性．     

ICP–AES法测定超高强度钢中的Al,Mn,Si,Ti

建立ICP–AES法测定超高强度钢中Al,Mn,Si,Ti 4种杂质元素的分析方法。研究了溶解条件试验及共存元素对4种分析元素的光谱干扰的情况,选择了Al 394.401 nm,Mn 257.610 nm,Si 251.611 nm,Ti 334.941 nm作为分析谱线。在选定的实验条件下,Al,Mn,Si,Ti的含量在0.001%~0.2%的范围内有良好的线性关系,相关系数均大于0.993,Al,Mn,Si,Ti的检出限为0.000 1~0.003 5 mg/L,加标回收率为94%~120%,测定结果的相对标准偏差小于10%(n=8)。该方法准确、快速,可用于超高强度钢中Al,Mn,Si,Ti的含量测定。